RADWAG PS Series User Manual

84
18. LIST OF COMMANDS COMPUTER – BALANCE
• Function TARE
Command T CR LF (balance tarring)
• Function ZERO
Command Z CR LF (balance zeroing)
• Function IMMEDIATELY SEND WEIGHING RESULT IN BASIC
MEASURING UNIT
Command SI CR LF (immediately send of balance indication)
• Function SEND WEIGHING RESULT IN BASIC MEASURING UNIT
Command S CR LF (send result when stable)
• Function SEND WEIGHING RESULT IN CURRENT MEASURING UNIT
Command SU CR LF (send result with current unit when stable)
• Function IMMEDIATELY SEND WEIGHING RESULT IN CURRENT
MEASURING UNIT
Command SUI CR LF (send result in current unit now – do not wait for stable
reading)
• Function CONTINUOUS TRANSMISSION IN BASIC MEASURING UNIT
Command C1 CR LF (start continuous transmission in basic unit)
• Function END OF CONTINUOUS TRANSMISSION IN BASIC
MEASURING UNIT
Command C0 CR LF (finish continuous transmission in basic unit)
• Function CONTINUOUS TRANSMISSION IN CURRENT MEASURING
UNIT
Command CU1 CR LF (start continuous transmission in current unit)
• Function END OF CONTINUOUS TRANSMISSION IN BASIC
MEASURING UNIT
Command U0 CR LF (finish continuous transmission in current unit)
CAUTION
If a non-existing or incorrect command finished with CR LF will be sent
to a balance, it responses with ES CR LF. Space between characters

RADWAG PS Series Specifications

General

Brand	RADWAG
Model	PS Series
Category	Scales
Language	English