19
To return to weighing with accuracy of the I weighing range:
• Take the load off the weighing pan.
• As the indication returns to zero and when symbols
and are
displayed, press
button.
• II weighing range pictogram/marker gets blank, the scale returns
to weighings with the accuracy of the I weighing range.
11.6. Units
<P9.Unit> parameter group enables change of start unit and temporary unit.
Unit change can be performed in the course of weighing or during operation
of other modes. 'Parts counting' and 'Percent weighing' modes are exceptions.
11.6.1. Start Unit
Parameter for setting unit that is displayed and used after device start-up.
Procedure:
• Enter <P9.Unit / 9.1.UnSt> submenu.
• Press
key, available units are displayed successively one by one.
Options in case when the main unit is [kg]:
• kg (kilogram),
• g (gram),
• lb (pound)*,
• N (Newton).
*) – unit disabled for verified weighing devices.
Options in case when the main unit is [g]:
• g (gram),
• kg (kilogram),
• ct (carat),
• lb (pound)*.
*) – unit disabled for verified weighing devices.
• Select start unit and press key, next go back to the home screen,
to do it press
key.
• Upon next start-up the scale runs with set start unit.
To Next Page
Loading...
Need help?
General
