27
no
Regular tare mode. Select this parameter to make the scale overwrite
the set (selected) tare value with the most recently entered one.
tArF
Select this parameter to make the scale store the latest tare value
in memory. The latest tare value is displayed after scale restart.
AtAr
Automatic tare mode.
EAcH
Select this parameter to make the scale automatically tare each accepted
measurement.
• Press key to confirm, next go to the home screen.
13.6. Tare: Enter Mode
The tare is entered using
+ keys combination from the home screen
level. There are two enter modes.
Procedure:
• Enter <P2.rEAd / 2.6.ttr> submenu.
• Press
key, parameter values are displayed successively one by one:
tArEH
Select to enter tare value manually by means of + keys
combination.
tArnn
Select to enter tare value that is stored in scale memory, use
+
keys combination.
• Press key to confirm, next go to the home screen.
13.7. Tare: Values Memory
It is possible to store 10 tare values in scale memory.
13.7.1. Entering Tare Value to the Weighing Device Memory
• Enter <P2.rEAd / 2.7.tArn> submenu, name of tare no. 1 from tares
database is displayed (<tArE 0>), to select a different record press
key.
To Next Page
Loading...
Need help?
General
