34
15.3.1. Additional Display Port
• Enter <5.3.AdSP / 5.3.1.Prt> submenu.
• Press
key, parameter values are displayed successively one by one:
nonE – none; rS1 – RS232 (1); rS2 – RS232 (2).
• Press
key to confirm, next go to the home screen.
16. PRINTOUTS
It is possible to define adjustment report printout template and GLP printout
template. To set the printouts go to <
P6.Prnt > submenu.
16.1. Adjustment Report
<P6.1.CrEP> is a group of parameters allowing you to declare variables that
are to be printed on an adjustment report printout. Each variable features
accessibility attribute: YES – print, no – do not print. Adjustment report
is automatically generated upon each completed adjustment process.
Variables list:
No. Name Description
6.1.1. CtP Performed adjustment type.
6.1.2. dAt Adjustment date.
6.1.3. tin Adjustment time.
6.1.4. Idb Serial number of the scale.
6.1.5. CdF
Difference between mass of adjustment weight that was measured
during last adjustment and mass of currently measured adjustment
weight.
6.1.6. dSh Dashed line separating printout data and signature fields.
6.1.7. SiG
An area for the signature of an operator carrying out the
adjustment.
Printouts are generated exclusively in English.
To Next Page
Loading...
Need help?
General
