Rajant BreadCrumb ES1-2450R User Manual

Feature LX5 ME4/KM3 ES1 JR3 SlipStream
Peregrine/
Hawk
Input Voltage
18-48
VDC
8-48 VDC (ME4)/24-48
VDC (KM3)
9-30
VDC
9-30 VDC 12 VDC 20-60 VDC
Min.
Recommended
PoE
24-48
VDC, 26-
33 W @
24 V (3-4
radios,
un-
heated)
24-48 VDC, 23 W @ 24 V
24
VDC,
19 W
24 VDC,
19 W
(AC
adapter)
50 W
USB Ports 2 1 1 0 6 1
Serial Port
no (see
Notes)
no (see Notes) no no no no
Realtime Clock yes yes no no yes yes
Case metal metal plastic plastic metal metal
Environment IP67 IP67(ME4)/Indoor(KM3) IP67
Weather
Resistant
Indoor IP67
Encryption HW/SW HW/SW SW SW HW/SW HW/SW
TRoIP yes yes yes no yes yes
Modbus yes yes yes no yes yes
SNMP yes yes yes no yes yes
Packet Capture yes yes yes no no yes
Gateway Mode yes yes yes no yes yes
Performance
Tests
yes yes yes no yes yes
Max Peers per
Transceiver
250+ 250+ 250+ 50 0 250+
RTLS (see
Notes)
yes yes yes no no yes
Notes:
Ethernet ports also adapt to standard slower speeds.
Unless stated otherwise, all PoE wattages are @ 24 V.
Add 2 W per heated radio and 2.5 W per powered USB peripheral.
JR2 included TRoIP settings but no USB port for using TRoIP.
Performance Tests are available with firmware version 11.19 or later.
KM3 is an indoor version of ME4.
To provide a serial port, ME4 has serial pins documented on the Amphenol connector and supports
modbus protocol on that connector.
To provide a serial port, ME4 can use an optional cable assembly with serial pins.
To provide a serial port, KM3 requires a special USB cable.
To provide a serial port, LX5 has serial pins documented on the Amphenol connector and supports
modbus protocol on that connector.
Real Time Location System (RTLS)
18

Rajant BreadCrumb ES1-2450R Specifications

General

Brand	Rajant
Model	BreadCrumb ES1-2450R
Category	Network Hardware
Language	English