F.2 DIN Rail Mount Kit
The DIN rail mounting bracket and 35 mm top hat DIN rail clip for BreadCrumb ES1 attach to the back of
the ES1-5050CS as described below. The ES1-5050CS DIN rail mount kit is Rajant P/N 90-100104-002.
The following diagrams show a BreadCrumb ES1 with DIN rail mounting bracket attached. In these dia-
grams, the DIN rail mounting bracket is attached so the DIN rail clip will be over the le side of the ES1-
5050CS (the side with the protective vent). It is also possible to attach the mounting bracket with the DIN
rail clip portion over the right side of the ES1-5050CS. The end of the bracket where the DIN rail clip at-
taches has a choice of two screwholes in the middle so the DIN rail clip can be attached in the proper ori-
entation whether the bracket is mounted over the le or right side of the ES1-5050CS.
Reminder Regarding Orientation
Reminder Regarding Orientation
The following simplified diagrams do not show the external features of the BreadCrumb ES1 such as the
The following simplified diagrams do not show the external features of the BreadCrumb ES1 such as the
antenna ports, Ethernet port, Status LED. In all vertically-oriented diagrams, the side with the Ethernet
antenna ports, Ethernet port, Status LED. In all vertically-oriented diagrams, the side with the Ethernet
port, M8 port, Status LED is facing down. The flip-up covers on the front of the mounting hole accesses
port, M8 port, Status LED is facing down. The flip-up covers on the front of the mounting hole accesses
are also not shown in the following diagrams.
are also not shown in the following diagrams.
Figure: BreadCrumb ES1 DIN Rail Mounting Bracket Attached (Back Corner View)
Figure: BreadCrumb ES1 DIN Rail Mounting Bracket Attached (Front View)
To Next Page
Loading...
Need help?
General
