To Next Page

To Previous Page

Trying Out the Instrument

R&S

RTM2000

31Getting Started 1317.4710.02 ─ 05

5. Press the ZOOM key again.

The zoom window closes.

4.3 Using the Virtual Screen

The virtual screen allows you to distribute the waveforms over 20 divisions. 8 of these

divisions are visible. You can scoll the divisions to select the visible part.

1. Press the AUTOSET key.

2. Turn the vertical SCALE knob clockwise until the vertical scale is 100 mV/div.

The scale value is displayed in the colored channel label on top of the window.

3. Press the "Intensity / Virtual screen" knob on the left until the "Virtual Screen" label

is displayed.

4. Turn the knob clockwise until the complete waveform is visible.

Using the Virtual Screen

Questions and Answers:

Need help?

Do you have a question about the R&S RTM2000 Series and is the answer not in the manual?

R&S RTM2000 Series Specifications

General