46
Navigation
Navigating to a waypoint or point of interest
You can perform a “Goto” to a Waypoint or to a specific location.
1. Select the waypoint or point of interest and select Goto from the
context menu.
You can stop the Goto at any time by selecting Stop from the
context menu, or by selecting another
Goto.
The Chart app will begin active navigation.
2. Navigate your vessel to the destination point, using the Chart app
as a guide.
3. Select
OK to accept the waypoint arrival alarm, which is triggered
when you reach a specified distance from the waypoint.
You can also perform a Goto from the
Go menu: Menu > Go .
Note:
In a network that contains 2 Element™ displays, with one display
performing active navigation (i.e.: performing a
Goto or a Follow)
navigation options will not be available on the networked display.
Adjusting the waypoint arrival alarm
The waypoint arrival alarm is enabled by default. The waypoint arrival
alarm creates a virtual circle, of the specified radius, around the
destination point. When your vessel reaches the virtual circle the
alarm is triggered.
From the homescreen:
To Next Page
Loading...
Need help?
General