To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if position data is not shown on Raymarine Radio?
If your Raymarine Radio is not showing position data, verify that the GPS is powered on and properly connected to the radio. Also, ensure that the units are correctly interfaced. As a final step, try power cycling the Ray240 VHF radio.
How to fix Raymarine Ray240 Radio when it will not power up?
If your Raymarine Radio is not powering up, first, check all wiring connections to ensure they are secure. Next, inspect the 10 amp fuse and replace it if it has blown.
Why is my Raymarine Radio not powering up?
If your Raymarine Radio is not powering up, it could be due to a loose wiring connection. Check all connections to ensure they are secure. Also, the 10 amp fuse may have blown. Inspect the 10 amp fuse and replace it if necessary.
Contains warnings on electrical safety, EME exposure, and navigation aid usage.
Covers antenna connection, MPE radius, and safe mounting distances.
Explains MMSI and ATIS numbers for DSC and European operation.
Details DSC call categories and system integration capabilities.
Describes how to operate the handset and its various buttons.
Instructions for power, volume, squelch, channel selection, and priority tuning.
Step-by-step guides for DSC calls, phone book management, and distress alerts.
How the radio handles incoming distress calls, acknowledgements, relays, and weather alerts.
Best practices for optimal EMC performance during installation.
Guidelines for mounting the transceiver, handset, and speaker.
Recommendations for antenna installation and cable routing.
Step-by-step guides for programming MMSI and ATIS numbers.
Guidance on identifying and resolving common faults.
General
