42 Ray49E Marine VHF Radio
To remove the selected channel from memory, navigate to CLEAR and then
press
CH/OK.
The SAVED icon either appears to indicate that the current channel has been
saved in memory or disappears to indicate that it has been removed from
memory.
You can also add the current channel to memory by pressing and holding the
SCAN/SAVE key on the microphone. If the channel is already saved, pressing and
holding the key removes the channel from memory.
Using the Watch Modes
The Watch Modes monitor the programmed Priority Channel and other user-
selected channel(s). The watch is halted when activity is detected on a monitored
channel. The Ray49E is equipped with 2 types of monitor operations: Dual Watch
and Tri Watch.
Note:
Monitor modes are disabled when the ATIS operation is active.
D10263-1
VHF OPS
SCAN MODE
HI/LO POWER
>SAVE CH
73
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
73
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
08
SAVE CHANNEL
>SAVE
CLEAR
08
SAVE CHANNEL
SELECT CH
[OK] / [CLR]
08
To Next Page
Loading...
Need help?
General
