Raymarine ST60 Tridata User Manual

2 ST60 Tridata Instrument Owner’s Manual
•Usingthetrip key to gain access to log, trip, water temperature and
timer information.
All key presses are momentary unless otherwise stated.
Depth
Use the depth key to select the required information, as shown in the
Using the depth key illustration. The depth measurement units are either
feet or metres, as selected during user calibration (see Chapter 4,
Calibration).
Current depth display
The current depth screen shows the title DEPTH, the selected depth units
and the depth measurement. It also shows a depth trend indicator, which
is either an up arrow to show seabed rising or a down arrow to show
seabed falling.
Current depth
Shallow
alarm threshold
Deep
alarm threshold
Anchor shallow
alarm threshold
Anchor deep
alarm threshold
depth
depth
depth
depth
Using the depth key
D4413-1
depth
reset
reset
reset
To enter and exit alarm adjust mode
In adjust mode, use
To enable/disable any alarm
trip
trip
Press
for 2 seconds
(toggle action)
Press
and together
to decrease or
to increase
81040_1.book Page 2 Thursday, November 7, 2002 10:21 AM

Raymarine ST60 Tridata Specifications

General

Brand	Raymarine
Model	ST60 Tridata
Category	Marine Equipment
Language	English