10 Chapter 1
Connections and Setup
Using the Remote Control to Choose On-screen Menu Items
Press the MENU button to bring up the Main Menu. Selecting a menu item can take you to another
menu, activate a choice, or activate a data entry field (such as the hour field in the CLOCK SET menu).
Complete the VCR Setup
To set up the VCR, you’ll need to set a few important menu
items the first time you turn on the unit.
This is the VCR Main menu.
SETUP
CLOCK SET
TIMER RECORDINGS
CHANNEL SET
FUNCTIONS
LANGUAGE SELECT
Move: Select:
End:
MENU
OK
LANGUAGE SELECT
Select a language.
English
Spanish
French
Move: Select:
End:
MENU
OK
Language Select
The language setting determines the language in which the
on-screen displays and menus appear. You can choose from
English, Spanish, or French. The default is English. If you
want to choose a different language, follow the steps below.
1. Make sure the remote is in VCR mode by pressing the VCR
button.
2. Press MENU to display the VCR SETUP MENU.
3. Press the down arrow button until LANGUAGE SELECT is
highlighted, and press OK (the LANGUAGE SELECT menu
appears).
4. Press the down arrow button until the desired language
is selected, then press OK.
5. When finished, press MENU to exit.
Auto Channel Search
Before you can watch channels through the VCR, you must
set the type of signal you have (cable or TV) and search for
all available channels.
1. Make sure the remote is in VCR mode by pressing the VCR
button.
2. Press MENU to display the VCR SETUP MENU.
3. Press the down arrow button until CHANNEL SET is
highlighted, and press OK (the CHANNEL SET menu
appears).
4. AUTO CHANNEL SEARCH is already highlighted, so press
OK.
CHANNEL SET
Auto Channel Search
Add/Remove Channels
Signal Type: CABLE
Cable Box Setup
Channel Change: CH3
Move: Select:
End:
MENU
OK
DRC6200N.01 Connections 7/28/03, 9:30 AM10
To Next Page
Loading...
Need help?
General
