Recording
Titler
You can superimpose one of the eight preset titles stored in memory over the scene
being recorded. You can also create your own title (up to 18 characters), store it, and
record it alone or with one of the preset titles.
[]TITLE []DISP.
TAYLOR WAYNE
Select Dial
SEL. (Select), F1,
and F2 Buttons
Indicator in Viewfinder or
on LCD Monitor
Recording a Title Stored in Memory
1. Place POWER switch in CAMERA.
Power indicator will light.
2. Make sure the mode select dial is not
set to LOCK.
3. Press SEL until [] TITLE appears
on the LCD monitor or viewfinder.
.
4O
Repeatedly press F1 to display the title
you want to record. The stored titles
appear in the following order.
Title Off - No Title
HAPPY BIRTHDA Y
0 UR VA CA TION
MERR Y CHRISTMAS
A SPECIAL DAY
HAPPY HOLIDAYS
OUR NEW BABY
WEDDING DA Y
CONGRA TULA TIONS
Title You Created
Title Off- No Title
.
.
Note: You can record the title you created
along with one of the titles stored in
memory or you can record two personal
titles.
Press the thumb trigger to start
recording. The title will be
superimposed over the scene you are
recording.
When you are finished recording the
title(s), press F1 to remove it from the
LCD monitor or viewfinder.
(continued oil next page)
To Next Page
Loading...
Need help?
General
