Playback,
Playback Features
Button
Button
Button
POWER Switch in VCR
Visual Searching
• During playback, press and release FF
or REW if you want to search the tape
visually in forward or reverse.
• Press PLA Y/PA USE on the camcorder
to return to normal playback.
• For brief searching, press and hold FF
or REW for more than two seconds.
• Release the button to return to normal
playback.
Tape Positioning
Place POWER switch in VCR and press
STOP.
• Press and quickly release REW or FF to
rewind or fast-forward the tape.
• Press STOP to stop the tape.
Stop-Action Pause
• During playback, press PLAY/PAUSE
to "stop the action" and view one frame
of the tape.
• Press PLA Y/PA USE on the camcorder
to return to normal playback.
Caution: Pause is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder
remains in pause for more than five minutes,
it will automatically enter the stop mode and
then turn off to prevent excessive tape wear.
51
To Next Page
Loading...
Need help?
General
