15
USING THE SCANNER
3. Press ENTER to lock in your choice.
SCANNING STORED CHANNELS
To scan through all the stored, unlocked channels in
the selected banks, press the SCAN button.
Adjust the SQUELCH knob to resume scan if the
scanner stays on a frequency after the transmission
has ended.
USING CHANNEL STORAGE BANKS
Your scanner automatically groups channels into
storage banks as you enter in frequencies. For
example, if you program a frequency into Channel
3, it is automatically stored in Bank 1.
This feature enables you to group like frequencies
together, such as all police or all fire, into one bank
for easy retrieval.
You can turn specific storage banks on or off, thus
affecting the time and speed with which the unit
scans. If the bank is turned on, the unit will scan any
and all channels within the bank that you have not
locked out. If the bank is turned off, the unit will
not scan any of the channels stored within the
bank.
To turn a bank on or off, press its number key while
scanning.
NOTES: One storage bank must be active at all
times.
You can manually choose a channel within a
bank even if that bank has been turned off.
The banks are grouped
as follows:
BANK CHANNELS
1 1-20
2 21-40
3 41-60
4 61-80
5 81-100
6 101-120
7 121-140
8 141-160
9 161-180
10 181-200
To Next Page
Loading...
Need help?
General
