USING THE SCANNER
To remove a lock on a channel:
1. Manually select the channel.
2. Press L–OUT. The L/O should disappear from the
display.
USING PRIORITY SCAN
When you designate one channel as the priority, the
scanner will check it every two seconds and will
remain there if an active transmission is in progress.
A P will appear in the display on the left whenever
the scanner switches to the priority channel.
1. Press the PGM button.
2. Enter the channel number.
3. Press the PRI button.
To activate the priority scan, press the PRI button
while scanning. PRI will appear in the display.
To turn off the feature, press the PRI button. PRI will
disappear from the display.
USING THE AM/FM RECEIVE MODES
Your scanner is preset to the most common receive
mode for each frequency range.
FREQUENCY BAND (MHz) RECEIVE MODE
30.000 - 54.000 FM
118.000 - 136.975 AM
FREQUENCY RANGE (MHz) RECEIVER MODE
137.000 - 174.000 FM
380.000 - 512.000 FM
806.000 - 960.000 FM
To Next Page
Loading...
Need help?
General
