17
USING THE SCANNER
To use Delay for an active channel found during a
scan or frequency search, press DELAY quickly while
the frequency is still active. DLY will appear in the
display.
To turn off the Delay feature, press the DELAY
button while the frequency is still active. DLY will
disappear from the display.
USING KEYLOCK
After programming your scanner, you can eliminate
accidental program or functional changes by
locking the keypad. To do so, slide the KEYLOCK
switch in the direction of the arrow. The only usable
buttons while this function is active are LIGHT,
MANUAL, SCAN, SQUELCH and VOLUME.
To turn the keylock function off, simply slide the
KEYLOCK switch in the opposite direction of the
arrow.
USING CHANNEL LOCKOUT
In the interest of speed, you can lock out channels
that you have not programmed yet or that transmit
continually. Once you do so, the scanner will
automatically skip this channel when scanning.
1. Press the MAN button. MAN will appear in the
display.
2. Enter the channel number you want to lock out.
3. Press the MANUAL button again.
4. Press the L/OUT button. L/O will appear in the
display.
If you want to hear a channel you have locked out,
simply select it manually. You cannot lockout all the
channels; at least one channel must remain active.
To Next Page
Loading...
Need help?
General
