Ricoh 4051 General Settings Guide

User Tools (System Settings)
56
4
Tray Paper Settings
❖
❖❖
❖ Paper Tray Priority: Copier (Copier/Document Server)
You can specify the paper tray from which paper is to be supplied.
Note
❒ Default: Tray 1
❖
❖❖
❖ Paper Tray Priority: Printer (Printer)
You can specify the paper tray from which paper is to be supplied.
Note
❒ Default: Tray 1, LCT
❒ The default tray switches to LCT if the optional large capacity tray (LCT)
is installed.
❖
❖❖
❖ Tray Paper Size: (Tray 2,3)
You can select the size of the copy paper loaded in the paper tray.
• The paper sizes you can load for trays, when the paper size selector knob
is set to the p mark, are as follows:
• A3L, B4 JISL, A4K, A4L, B5 JISK, B5 JISL, A5K, A5L, 210 × 340
mmL, 210 × 182 mmK, 210 × 170 mmK
• 11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×13"L, 8
1
/
2
"×11"K, 8
1
/
2
"×11"L,
8
1
/
4
"× 13"L, 8"×13"L, 7
1
/
4
"×10
1
/
2
"L, 5
1
/
2
"×8
1
/
2
"K, 5
1
/
2
"× 8
1
/
2
"L,
11"×15"L, 11"×14"L, 10"×15"L, 8
1
/
4
"×14"L, 8"×10
1
/
2
"L, custom size
(139.7-297 mm(5.5"-11.7") wide × 139.7-431.8 mm(5.5"-17") long)
• 8K(267 × 390 mm)L, 16K(195 × 267 mm)K, 16K(195 × 267 mm)L
Important
❒ If the specified paper size differs from the size of paper actually set in the
paper tray, a paper misfeed might occur because the paper size cannot be
detected accurately.
Note
❒ Default: A4K
❒ The tray fence for the optional large capacity tray (LCT) is fixed. If you
need to change the paper size, contact your service representative.
❒ The optional tab sheet holder is required when using tab stock in tray 2 or
3.
Reference
See p.113 “Changing the Paper Size”.
MartiniC2_GBzen_F_pre_FM.book Page 56 Thursday, October 21, 2004 5:07 PM

Ricoh 4051 Specifications

General

Brand	Ricoh
Model	4051
Category	All in One Printer
Language	English