User Tools (System Settings)
60
4
❖
❖❖
❖ Set Date
You can set the date for the copier's internal clock using the number keys.
Note
❒ To change between year, month and day, press [←
←←
←] and [→
→→
→].
❖
❖❖
❖ Set Time
You can set the time for the copier's internal clock using the number keys.
Note
❒ To change between hours, minutes and seconds, press [←
←←
←] and [→
→→
→].
❖
❖❖
❖ Weekly Timer Code
You can set an 8-digit code needed to turn on the power when it is off because
of the Weekly Timer settings.
Note
❒ Default: Off
❒ If [On] is selected, enter the weekly timer code.
❒ If [On] is selected without entering the timer code, the machine cannot be
used even if the power is turned on. If [Off] is selected, the machine can be
used without the need for a timer code.
❖
❖❖
❖ Auto Logout Timer
You can specify whether or not to automatically log out a user when the user
does not operate the machine for a specified period of time after logging in.
Note
❒ Default: On, 60 seconds
❒ When [On] is selected, the time can be set from 10 to 999 seconds, in one sec-
ond increments, using the number keys.
❖
❖❖
❖ Weekly Timer: Monday – Sunday
You can specify the times at which the power is turned on and off on each day
of the week.
Note
❒ Enter the time in the 24–hour format.
Administrator Tools
The following User Tools should be set by the administrator.
❖
❖❖
❖ User Authentication Management
See Security Reference.
❖
❖❖
❖ Administrator Authentication Management
See Security Reference.
MartiniC2_GBzen_F_pre_FM.book Page 60 Thursday, October 21, 2004 5:07 PM
To Next Page
Loading...
Need help?
General
