Ricoh Aficio C3002 User Manual

Placing Originals
Placing Originals on the Exposure Glass
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be copied.
CJW001
1
1
1. Positioning mark
3. Lower the ADF.
Placing Originals in the Auto Document Feeder
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect
the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place
originals or other objects on the top cover. Doing so may cause a malfunction.
Placing Originals
63

Ricoh Aficio C3002 Specifications

General

Print Speed	30 ppm (B/W), 30 ppm (Color)
Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Paper Capacity (Maximum)	4, 400 sheets
Duplex Printing	Yes
ADF Capacity	100 sheets
Standard Features	Copy, Print, Scan
Hard Disk Drive	250 GB
Interface	USB 2.0, Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Printer Languages	PCL5c, PCL6, PostScript 3
Paper Capacity (Standard)	1, 200 sheets
Scanner Type	Color Flatbed with ADF
Scanner Resolution	600 dpi
Network Connectivity	Ethernet
Power Consumption	1.7 kW (Maximum)
Power Source	120V/60Hz/15A
Optional Features	Fax, Additional Paper Trays, Finisher
Network Protocol	TCP/IP
Scan Formats	PDF, JPEG, TIFF
Scan To	Email, Folder, USB
Memory	1.5 GB (Standard), 1.5 GB (Maximum)