Programs
125
6
Programs
You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 10 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: the scan settings, 1 sid-
ed/2 sided original, Top to Top/Top to Bottom, Last Page, Divide, Original
Feed Type, File Type, Batch/SADF, and Stamp.
Registering Frequently Used Setting
To register frequently used settings in a program:
A On the initial scanner screen, make the settings you want to register in a
program.
B Press the {Program} key.
C Press [m Register].
D Select the number of the program in which you want to register the set-
tings.
Program numbers with m already have settings in them.
The soft keyboard appears.
E Enter the program name.
You can enter up to 40 characters.
AHY001S
To Next Page
Loading...
Need help?
General