Sending Scan Files by E-mail
20
1
❒ The e-mail address that is entered directly can be registered in the ma-
chine’s address book. For details, see "Registering a Directly-Entered Des-
tination in the Address Book".
Reference
p.141 “Sending E-mail”
p.23 “Registering a Directly-Entered Destination in the Address Book”
Selecting Destinations by Searching an LDAP Server
You can search the LDAP server for an address and then specify that address as
an e-mail destination.
Important
❒ This function requires an LDAP server to be running on the network.
❒ Under [System Settings], the server must be registered and [Use LDAP Server]
must be set to [On]. For details, see General Settings Guide.
A Press [].
B Press [Search LDAP].
C Press [Select Server].
D Select the LDAP server.
If authentication is required to access the selected server, the authentication
screen appears. To authenticate, enter the user name and password.
E Press [OK].
To Next Page
Loading...
Need help?
General