Basic Operation for Storing Scan Files
59
3
Basic Operation for Storing Scan Files
This section describes the basic operation for storing scan files.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B Place originals.
C If necessary, press [Scan Settings] to specify scanner settings such as scan
type, resolution, image density, or scan size.
For details, see "Various Scan Settings".
D If necessary, press [1 Sided Orig.] or [2 Sided Orig.] to scan one or both sides of
the originals.
For details, see "Setting for Scanning Sides of Originals".
E If necessary, press [Original Feed Type] to specify settings such as original ori-
entation.
For details, see "Setting of Original Feed Type".
F Press [Store File].
G Press [Store Only].
H If necessary, specify the stored file's information, such as [User Name], [File
Name], and [Password].
For details, see "Specifying File Information for a Stored File".
I Press [OK].
To Next Page
Loading...
Need help?
General