Sending Scan Files by Scan to Folder
62
2
Sending Scan Files to an FTP Server
This section explains how to specify destinations when sending files to an FTP
server.
Directly enter the path for the folder on the FTP Server
You can enter the path to an FTP server manually.
A Press [Dest.:].
B Select [FTP], and then press the {OK} key.
C Enter the FTP server name, and then press the {OK} key.
Instead of specifying the destination using its server name, you can also use
its IPv4 address.
D If you change the port number specified under [System Settings], enter a new
number using the number keys, and then press the {OK} key.
E Enter the user name, and then press the {OK} key.
To Next Page
Loading...
Need help?
General