3
1. When the Machine Does
Not Operate As Wanted
This chapter describes basic troubleshooting procedures that are applicable to
all functions of this machine.
Indicators
This section describes Indicators displayed when the machine requires the user
to remove misfed paper, add paper, or perform other procedures.
x: Misfeed indicator Appears when a misfeed occurs. See p.105 “Removing
Jammed Paper”.
B: Add Paper indicator Appears when paper-out condition occurs. See p.87
“Loading Paper”.
D: Add Toner indicator Appears when toner runs out. See p.99 “Adding Toner”.
d: Add Staple indicator Appears when staples run out. See p.118 “Removing
Jammed Staples”.
y: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full. See
p.121 “Removing Punch Waste”
L: Service Call indicator Appears when the machine is malfunctioning or re-
quires maintenance.
M: Open Cover indicator Appears when the front cover, etc., is open.
To Next Page
Loading...
Need help?
General
