Energy Saving Functions
To reduce its power consumption, this machine has the following functions:
Sleep Mode
• If this machine remains idle for a specified period, it automatically enters Sleep Mode to reduce
its electrical consumption.
• The default delay time the machine waits before entering Sleep Mode is 1 minute. This default
time can be changed.
• The machine can print jobs from computers and receive faxes while in Sleep Mode.
Specification
Type 1 Type 2
Reduced Electrical Consumption by
Sleep Mode
1.0 W 1.0 W
Time of Switch into Sleep Mode 1 minute 1 minute
Time of Switch out from Sleep Mode 10 seconds 10 seconds
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see “Timer Settings”, Network and System
Settings Reference .
• Depending on which Embedded Software Architecture application is installed on it, the machine might
take longer than indicated to enter Sleep Mode.
33
To Next Page
Loading...
Need help?
General
