• p.87 "Changing to a Size That Is Not Automatically Detected"
• p.98 "Envelopes"
Changing the Paper Size in Lower Paper Tray or Lower Paper Trays
This section describes how to change the paper size in the lower paper tray or the lower paper trays.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Check the paper edges are aligned with the right side.
• Slide the side fences until they are aligned with the paper size, and then re-lock the side fences.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2. Remove paper if loaded.
3. Release the lock on the side fences.
Changing the Paper Size
85
To Next Page
Loading...
Need help?
General
