6. Extension unit
Attached to the LCT and holds 2,500 sheets of B4 JIS (Japanese Industrial Standard) or 8
1
/
2
× 14 sized paper.
7. Wide Large Capacity Tray (Wide LCT)
Holds 2,000 sheets of A3 or 11 × 17 sized paper. Use to copy or print onto OHP transparencies, adhesive
labels, translucent paper, envelopes, and custom size paper.
8. Copy tray
Copied/printed paper or fax messages are delivered here.
9. Finisher SR5000 (100-Sheet-Staples)
Sorts, stacks, staples, and punches multiple sheets of paper.
*6:
Finisher upper tray
*7:
Finisher shift tray
10. Twin Interposer
Inserts cover or slip sheets into copied or printed paper.
11. Z-folding unit
Makes two parallel folds on copied or printed paper, one of which faces in and the other facing out.
12. Interposer
Inserts cover or slip sheets into copied or printed paper.
• The bypass tray cannot be used if the wide large capacity tray (Wide LCT) is installed.
Internal options
This section describes the options that can be installed in the machine.
• Fax unit
Allows you to use the facsimile function.
• Printer/Scanner unit
Allows you to use the printer and scanner functions.
• Extra G3 Interface Unit
This lets you add a G3 fax line.
• IEEE 1284 Interface Board
Allows you to connect to an IEEE 1284 cable.
• Wireless LAN board
Allows you to install a wireless LAN interface.
• Bluetooth interface unit
Allows you to expand the interface.
Guide to Components
35
To Next Page
Loading...
Need help?
General
