Loading Paper in Trays
Loading Paper into a Standard or Optional Paper Feed Tray
• Do not put your hands inside the printer when the input tray is removed. Some internal parts
become hot and are a burn hazard.
• Do not pull out the paper tray forcefully. If you do, the tray might fall and cause an injury.
• Take care to avoid cutting your hands when loading paper.
• Make sure paper is not stacked higher than the upper limit mark inside the paper feed tray. Excessive
stacking can cause paper jams.
• Do not mix different types of paper in the same paper tray.
• First load the paper in the tray, and then specify the paper type and size using the control panel.
When printing a document, specify the paper size and type in the printer driver to the same settings
used in the control panel.
• Do not move the side paper guides and end paper guide forcefully. Doing so can damage the tray.
• Curled paper may jam, straighten curled paper before loading.
• When loading paper, take care not to touch the surface of the paper.
• During printing, do not pull out or push in the paper tray.
1. Lift and pull tray carefully, and then pull it out with both hands.
To Next Page
Loading...
Need help?
General