Replacing the Maintenance Kit
Refer to the maintenance guide provided with the new items for the replacement maintenance kit.
• The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot
surface”. Otherwise, an injury might occur.
• Grip the plug, not the cord, when pulling the plug from the socket. Pulling the cord causes wear
and tear that can result in fire or electric shock.
• Wait at least one hour after power off before replacing parts. Not allowing the printer to cool
may result in burns.
When to replace the Maintenance Kit.
The maintenance kit contains parts for maintaining the printer.
Replace the maintenance kit if the following message appears on the display:
"Replacmnt Requrd:Maint. Kit"
When the following message appears on the display, the maintenance kit contains parts should be
replaced soon. Prepare a new maintenance kit.
"Repl Requrd Soon:Maint. Kit"
To Next Page
Loading...
Need help?
General