Registering Authentication
111
5
Registering Authentication
SMTP Authentication
For each user registered in the Ad-
dress Book, you can register a login
user name and login password to be
used when accessing an SMTP server.
Reference
To use an SMTP server, you need
to program it beforehand. For de-
tails, see “SMTP Server Settings”,
Network Guide.
Note
❒ When [Do not Specify] is selected for
SMTP Authentication, the User
Name and Password that you have
specified in SMTP Authentication
of File Transfer settings applies.
For details, see “Connecting and
Setting Up", Network Guide.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C
Press
[
Administrator Tools
]
, and then
press [TNext].
D
Press [Address Book Management].
E Press the name you want to regis-
ter or enter the registered number
using the number keys
Note
❒ To register a name in the Ad-
dress Book, see p.72 “Register-
ing Names”.
F Press [Auth. Info].
G Press [Specify Other Auth. Info] on
the right side of SMTP Authenti-
cation.
H Press [Change] under Login User
Name.
I Enter the login user name, and
then press [OK].
Note
❒ You can enter up to 64 charac-
ters for the user name.
❒ When using POP before SMTP
Authentication, you can enter
up to 63 alphanumeric charac-
ters.
Reference
p.159 “Entering Text”
J Press [Change] under Login Pass-
word.
K Enter the password, and then
press [OK].
Note
❒ You can enter up to 64 charac-
ters for the password.
L Enter the password again to con-
firm, and then press [OK].
AdonisC4-AE_zen_F_FM_forPaper.book Page 111 Thursday, May 12, 2005 3:32 PM
To Next Page
Loading...
Need help?
General
