Document Server
36
3
❒ When the machine is printing a
document stored using the copier
function, wait until printing has
finished before you store a docu-
ment in the Document Server.
A Press the {Document Server} key.
B Press [Scan Original].
C Enter a file name, user name, or
password if necessary.
Note
❒ If you do not enter a file name,
one is automatically assigned.
Reference
p.37 “To register or change the
user name”
p.37 “To change the file name”
p.38 “To set or change the pass-
word”
D Place originals either on the expo-
sure glass or in the ADF.
Reference
For information about types of
originals and how to place
them, see Copy Reference.
E Make any required settings.
Reference
For details, see Copy Reference.
F Press the {Start} key.
The document is stored in the Doc-
ument Server.
Note
❒ To stop scanning, press the
{Clear/Stop} key. To restart a
paused scanning job, press [Con-
tinue] in the confirmation dis-
play. To delete saved images
and cancel the job, press [Stop].
❒ When a password is set, ap-
pears on the left side of the file
name.
❒ After scanning, stored docu-
ments appear on the Select Files
to Print display. If this display
does not appear, press [Scanning
Finished].
❒ When placing an original on the
exposure glass, press [Scanning
Finished] after all the originals
have been scanned.
AdonisC4-AE_zen_F_FM_forPaper.book Page 36 Thursday, May 12, 2005 3:32 PM
To Next Page
Loading...
Need help?
General
