5
Reading the Display and Using Keys
This section explains how to read the display and using the selection key for the
initial display.
1. Selection keys
Correspond to the function items at the
bottom line on the display. Example: Ba-
sic screen When the instruction “press
[JobReset]” appears in this manual, press
the center selection key.
2. {Escape} key
Press to cancel an operation or return to
the previous display.
3. {OK} key
Press to set a selected item or entered nu-
meric value.
4. Scroll keys
Press to move the cursor in each direc-
tion, step by step.
When the {U}, {T}, {V}, or {W} key ap-
pears in this manual, press the scroll key
of the same direction.
AYM013S
To Next Page
Loading...
Need help?
General
