1. When the Machine Does Not Operate
As Wanted
This chapter describes basic troubleshooting procedures.
Indicators
This section describes indicators that appear on the display panel.
Display Panel Indicator
Indicator Status
: Misfeed indicator Appears when a misfeed occurs.
See p.47 "Removing Jammed Paper".
: Load Paper indicator Appears when paper runs out.
See “Loading Paper”, About This Machine .
: Add Toner indicator Appears when toner runs out.
See “Adding Toner”, About This Machine .
: Add Staple indicator Appears when staples run out.
See “Adding Staples”, About This Machine .
: Waste Toner Full indicator Appears when the waste toner bottle is full.
Contact your service representative.
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
See p.72 "Removing Punch Waste".
: Empty Waste Staple Receptacle
indicator
Appears when the waste staple receptacle is full.
See p.73 "Removing Staple Waste".
: Service Call indicator Appears when the machine is malfunctioning or requires
maintenance.
: Open Cover indicator Appears when one or more covers of the machine is open.
• p.47 "Removing Jammed Paper"
• p.68 "Removing Jammed Staples"
11
To Next Page
Loading...
Need help?
General
