Other Printing Problems
This section describes likely causes of and possible solutions for problems that can occur when printing
from a computer.
• Certain firewall settings can prevent the printer being automatically detected when the [Detect...]
button is clicked in the Printer Installer. If the printer is not automatically detected, disable the client
computer's firewall settings, and then click the [Detect...] button again. For details about firewall
settings, see "Setting the Firewall", Printer Reference , or Windows Help.
When you cannot print clearly
Problem Cause Solution
The printed image is faded
over the entire page.
When is blinking, toner is
beginning to run out.
Add toner. See "Adding Toner", About
This Machine .
The printed image is faded
over the entire page.
The paper is damp. Use paper that has been stored in the
recommended temperature and
humidity condition. See "Paper
Storage", About This Machine .
The printed image is faded
over the entire page.
The paper is unsuitable. Use recommended paper. Printing on
coarse or treated paper might result in
faint print image. See "Recommended
Paper Sizes and Types", About This
Machine .
Images smudge when
rubbed. (Toner is not fixed.)
The specified [Adjust Toner
Fusing Temperature] or
[Adjust Paper Feed Speed]
setting may not be suitable for
the thickness and type of the
loaded paper.
Change the [Adjust Toner Fusing
Temperature] or [Adjust Paper Feed
Speed] setting in [Adjustment Settings for
Operators]. For details about [Adjust
Toner Fusing Temperature] and [Adjust
Paper Feed Speed], see "Adjustment
Settings for Operators", Network and
System Settings Guide .
Garbled or incorrect
characters are printed
continuously.
The correct emulation might
have not been selected.
Select the correct emulation. For details
about how to specify the emulation
setting, contact the administrator.
Other Printing Problems
35
To Next Page
Loading...
Need help?
General
