2. Square the paper and load it print side down.
Do not stack paper over the limit mark.
• Whole tray pulled out
• Left half of the tray pulled out
3. Carefully push the paper tray fully in.
• You can load paper even if Tray 1 is in use. It is okay to pull out the left half of the tray while Tray 1
is in use.
Loading Paper into the A3/11 × 17 Tray Unit
(mainly Europe)
A3/11 × 17 tray unit can hold A3 paper only. If you want to print on A4 , B4 JIS , 11 × 17 ,
or 8
1
/
2
× 11 , contact your service representative.
(mainly North America)
A3/11 × 17 tray unit can hold 11 × 17 paper only. If you want to print on A3 , A4 , B4 JIS ,
or 8
1
/
2
× 11 , contact your service representative.
8. Adding Paper and Toner
106
To Next Page
Loading...
Need help?
General
