When Print Quality Is Not Satisfactory
12
STEP1-1 In the case of skewing
1. Setting media is not correct.
Please set the media correctly referring to the video which describes how to set media or
section “setting media” in the manual” Operating Instructions”.
How to set media:
https://www.youtube.com/watch?v=aRqvMQCfMTg&feature=youtu.be
https://2280171.mediaspace.kaltura.com/media/How+to+set+media+on+the+Pro+L5130+s
eries+of+wide+format+devices/1_mlm093yt
2. Printing on the media rewound area.
If you print on the media rewound area, the machine cannot feed the media correctly. Use
only one way.
3. Contacting the floor.
When the media edge contacts the floor and pulls the media to one side, media skew occurs.
Use the roll-up unit so that the media edge does not touch the floor.
To Next Page
Loading...
Need help?
General
