When Print Quality Is Not Satisfactory
21
Black Lines（level changes as the job progresses.）
Black lines occur, and level changes as the job progresses.
1st job 20th job
[Cause/Technical reason]
Media thickness that are not correct.
The correct media thickness setting is +1. However, “0” is set.
Feed quantity is corrected according to the media setting while printing.
If this setting is not correct, the function of correction does not work.
[Solution]
Please set the media settings correctly referring to the section “Media setting” in the manual”
Operating Instructions”.
To Next Page
Loading...
Need help?
General
