Initial Setup
When you turn this machine on for the first time, you must set the following items. Select each setting
using the [ ], [ ], or number keys, and then press the [OK] key.
Display language
The selected language here is used for displaying messages, etc.
Country
*3
The selected country is used for configuring the settings related to fax transmissions with
appropriate default values for the country of use.
User fax number
*1
The registered number is used as the fax number of the machine. The user fax number can contain
0 to 9, spaces, and "+".
User name
*1
The name entered here is used as the name of the fax sender.
Date/Time
The time and date entered here are used for the machine's internal clock.
Area
*2 *3
By selecting the area in which the machine is being used, you can narrow down the choice of
display language and other settings.
*1
This setting is only available with Type 3 and 4 models.
*2
This setting is only available with Type 1 and 2 models.
*3
This setting may not be available depending on the region in which the machine is being used.
Initial Setup
opal-p2_mf2_com_user_guide_00142321_eng.xml 29
To Next Page
Loading...
Need help?
General
