Item Setting Description
File Format (Color/Gray
Scale)
Required File format of the scanned file when scanning in color.
PDF or JPEG can be selected. PDF supports multiple
pages in a document, but JPEG does not.
File Format (Black & White) Required File format of the scanned file when scanning in black
and white. PDF or TIFF can be selected. Both formats
support multiple pages in a document.
Scan Size Optional Select the scanning size for the original from A5, B5,
A4, Executive, Half Letter, Letter, Legal, 16K, or
custom size.
If you select custom size, select [mm] or [Inch], and
then specify the width and length.
Resolution Optional Select the scan resolution from 100×100, 150×150,
200×200, 300×300, 400×400, or 600×600 dpi.
Density Optional Specify the image density by clicking the right or left
buttons. These keys increase or decrease the image
density in single increments up to 5.
• To send files via e-mail, SMTP and DNS settings must be configured properly.
• If you are using the Scan to E-mail function, select a time zone according to your geographic
location to send email with correct transmission date and time.
• To send files to an FTP server or computer, the user name, password, and directory must be
configured properly.
• On a network that uses a DNS server, specify a computer name in [Service Name] and the name
of the domain to which the computer belongs in [Domain]. In this case, also configure the DNS
related settings using Web Image Monitor.
• Scan destinations cannot be registered using the control panel.
Modifying Scan Destinations
This section describes how to modify the information of registered destinations.
1. Start the Web browser, and access the machine by entering its IP address.
2. Click [Scan Destination].
3. Click the [E-mail Address], [FTP], or [Folder] tab.
Registering Scan Destinations
opal-p2_mf2_com_user_guide_00142099_eng.xml 85
To Next Page
Loading...
Need help?
General
