Rockwell Automation Publication 440R-UM013F-EN-P - July 2021 83
Appendix B
Regulatory Approvals
Agency Certifications • UL Listed Industrial Control Equipment, certified for US and Canada.
• CE marked for all applicable directives
• C-Tick marked for all applicable acts
• CCC Mark
•S-Mark
Compliance with European
Union Directives
This product has the CE marking and is approved for installation within the
European Union and EEA regions. It has been designed and tested to meet the
following directives.
EMC Directive
This product is designed and tested to meet the European Council Directive
2004/108/EC on Electromagnetic Compatibility (EMC) and the following
standards:
• EN 61000-6-4: Generic Standards - Emission Standard for Industrial
Environments
• EN 61000-6-2: Generic Standards - Immunity for Industrial
Environments
This product is intended for use in an industrial environment.
Machine Safety Directive
This product is designed and tested to meet the European Council Directive
2006/42/EC on machinery and the following standards.
• IEC/EN 61508 - Functional safety of electrical/electronic/programmable
electronic safety-related systems
• IEC/EN 62061 - Safety of machinery - Functional safety of safety-related
electrical, electronic, and programmable electronic control systems
• EN ISO 13849-1 - Safety of machinery -- Safety-related parts of control
systems -- Part 1: General principles for design
This product is intended for use in an industrial environment.
The performance of the safety function is dependent on the structure of all
devices that comprise the safety function. Table 19 on page 84
and Table 20 on
page 84 provide the data that must be used to represent safety relays when
calculating the safety integrity level (SIL) or the Performance Level (PL).
Safety relays can be used in safety circuits according to DIN EN 60204-1/VDE
0113 part 1. The following safety requirements are achievable in maximum
based on the operation mode and wiring.
To Next Page
Loading...
Need help?
General
