Roland EGX-600 Service Notes

85
4 Adjustment
4
4-10 Z Axis Load Check (Referential Time : 8 minutes)
1
Turn on the Power while pressing the [ ], [ ], [ ]
keys to enter the Service Mode.
Select the [LOAD] menu by pressing the [MENU] key and
press [ENTER] key.
2
Select the [AXIS Z] in the [LOAD] menu and press [ENTER]
key. Then, Carriage moves to the Limit Position.
Enter the value 350 and press the [ENTER] key.
CHECK MODE
LOAD CON. CARD
[ ], [ ], [ ] + POWER ON
[ENTER] key
[MENU] key
AXIS X Y Z S
[ENTER] key
AXIS X Y Z S
VALUE 350
[ENTER] key
AXIS X Y Z S
VALUE 350 OK
3
After setting the value, the load check starts.
The Carriage moves in the Z direction to check the load.

Roland EGX-600 Specifications

General

Brand	Roland
Model	EGX-600
Category	Printer
Language	English