Roland FP-60 User Manual

12
Advanced Operation
Renaming a Song (Rename Song)
Here’s how to rename a previously-saved song.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Rename Song.”
2. Press the [Function] (Enter) button.
The Rename Song screen appears.
3. Use the [–] [+] buttons to select the media that contains the
song that you want to rename.
4. Press the cursor [J] (right) button.
5. Use the [–] [+] buttons to select the song that you want to
rename, and then press the cursor [J] (right) button.
6. Rename the song.
Button Operation
[K] [J] buttons
Select the character to change.
[–] [+] buttons Change the character.
If you decide to cancel, press the [Exit] button.
7. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
8. Use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The song is renamed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
9. Press the [Exit] button several times to exit Function mode.
Copying a Saved Song (Copy Song)
Songs that have been saved in internal memory can be copied to USB ash
drive. Alternatively, songs stored on a USB ash drive can be copied to
internal memory.
* Audio les cannot be copied.
* If a USB ash drive is not connected, you won’t be able to perform this
operation.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Copy Song.”
2. Press the [Function] (Enter) button.
The Copy Song screen appears.
3. Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations.
4. Press the cursor [J] (right) button.
5. Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [Exit] button.
6. Press the [Function] (Enter) button.
The copy is executed.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
MEMO
If a song with the same le name has already been saved, the
conrmation message “Overwrite?” appears. To overwrite the
song, use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
7. Press the [Exit] button several times to exit Function mode.

Roland FP-60 Specifications

General

Sound effects	Ambience, Equalization
Tones quantity	279
Pedals quantity	1
RMS rated power	26 W
Number of speakers	2
Maximum polyphony (notes)	288
Display resolution	132 x 132 pixels
Product color	Black
Keyboard name	PHA-4
Keys quantity	88 keys
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Sound pressure level	103 dB
Temperaments quantity	10
Mobile operating systems supported	Android, iOS
Bluetooth version	3.0+HS
USB connector type	USB Type-A, USB Type-B
Power consumption (max)	22 W
Power consumption (min)	4 W

Weight and Dimensions

Depth	344 mm
Width	1291 mm
Height	125 mm