Roland FP-60 User Manual

15
Advanced Operation
Saving a Registration Set (Registration Set Export)
Here’s how the registration set that’s saved in the FP-60 can be saved to a
USB ash drive.
* If you’re saving to a USB ash drive, connect your USB ash drive to the
USB MEMORY port before proceeding.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Reg. Set Export.”
2. Press the [Function] (Enter) button.
The Reg. Set Export screen appears.
3. Renaming the registration set.
Button Operation
[K] [J] buttons
Select the character to change.
[–] [+] buttons Change the character.
If you decide to cancel, press the [Exit] button.
4. Press the [Function] (Enter) button.
The registration set is saved.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
5. Press the [Exit] button several times to exit Function mode.
Loading a Saved Registration Set (Registration Set
Import)
Here’s how a registration set saved on a USB ash drive can be loaded into
the registrations of the FP-60.
* If you want to load a registration set from a USB ash drive, connect
your USB ash drive to the USB MEMORY port before proceeding.
NOTE
Note that when you load a registration set, it will overwrite
(and erase) all of the registrations already in registration memory.
If you wish to retain your existing registrations, save them to a
USB ash drive.
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Reg. Set Import.”
2. Press the [Function] (Enter) button.
The Reg. Set Import screen appears.
3. Use the [–] [+] buttons to select the registration set you
want to load.
4. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
5. Use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The registration set will be loaded.
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
6. Press the [Exit] button several times to exit Function mode.

Roland FP-60 Specifications

General

Sound effects	Ambience, Equalization
Tones quantity	279
Pedals quantity	1
RMS rated power	26 W
Number of speakers	2
Maximum polyphony (notes)	288
Display resolution	132 x 132 pixels
Product color	Black
Keyboard name	PHA-4
Keys quantity	88 keys
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Sound pressure level	103 dB
Temperaments quantity	10
Mobile operating systems supported	Android, iOS
Bluetooth version	3.0+HS
USB connector type	USB Type-A, USB Type-B
Power consumption (max)	22 W
Power consumption (min)	4 W

Weight and Dimensions

Depth	344 mm
Width	1291 mm
Height	125 mm