Roland FP-60 User Manual

5
Panel Descriptions
˙
Rear Panel
Connect pedals and USB ash drive.
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
1
USB Computer port
You can use commercially available USB cable to connect the FP-60
to your computer. You can then use MIDI-related software to record
and play back FP-60 performances.
2
USB Memory port
You can use USB ash drives to do the following.
5 Play WAV les, MP3 les, and standard MIDI les (SMF les) copied from
your computer.
5 Make audio recordings of your FP-60.
5 Export/Import a registration set.
* Never turn o the power or disconnect a USB ash drive or the
power cord while the USB memory access indicator is blinking.
* Use a commercially available USB ash drive or a USB ash
drive sold by Roland. However, we cannot guarantee that all
commercially available USB ash drives will work with this unit.
3
DC IN jack
Connect the included AC adaptor here.
4
Pedal Damper / Sostenuto / Soft jacks
Connect pedals to these jacks.
* Do not connect any pedal other than the specied pedal to the
Pedal Damper jack.
* The EV-5 is compatible only with the Pedal Sostenuto / Soft jack.
5
Speaker [O / On] switch
Turns the FP-60’s speakers on or o.
6
Input Stereo jack
Connect an audio player here.
* If you use a cable that contains a built-in resistor, the volume of the
device connected to the Input Stereo jack might be decreased. Use
a connection cable that does not contain a resistor.
7
Output R, L/Mono jacks
You can output the sound of FP-60 to amplied speakers.
* To prevent the inadvertent disruption
of power to your unit (should the
plug be pulled out accidentally),
and to avoid applying undue stress
to the jack, anchor the power cord
using the cord hook, as shown in the
illustration.
1 2
3
4
5 6 7
Computer
Amplied speakers
USB ash drive
Audio player
Pedals
DP-10
(Sold separately: KPD-90, RPU-3, EV-5)
Place the AC adaptor so
the side with the indicator
(see illustration) faces upwards
and the side with textual
information faces downwards.
The indicator will light when you
plug the AC adaptor into an AC
outlet.
AC outlet
Indicator
Power cord
AC adaptor

Roland FP-60 Specifications

General

Sound effects	Ambience, Equalization
Tones quantity	279
Pedals quantity	1
RMS rated power	26 W
Number of speakers	2
Maximum polyphony (notes)	288
Display resolution	132 x 132 pixels
Product color	Black
Keyboard name	PHA-4
Keys quantity	88 keys
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Sound pressure level	103 dB
Temperaments quantity	10
Mobile operating systems supported	Android, iOS
Bluetooth version	3.0+HS
USB connector type	USB Type-A, USB Type-B
Power consumption (max)	22 W
Power consumption (min)	4 W

Weight and Dimensions

Depth	344 mm
Width	1291 mm
Height	125 mm