Roland FP-60 User Manual

16
Advanced Operation
˙
Convenient Functions
Reformatting Memory (Format Media)
You can completely erase all data that were saved in internal memory or on
a USB ash drive.
NOTE
5 All data saved in internal memory or on the USB ash drive
will be erased when you initialize the media.
5 If you want settings other than the internal memory and
USB ash drive data to be returned to their factory-set state,
execute a Factory Reset (p. 16).
1. If you want to initialize a USB ash drive, connect the USB
ash drive to the USB Memory port (p. 5).
2. Press the [Function] button, and then use the [K] [J]
buttons to select “Format Media.”
3. Press the [Function] (Enter) button.
The Format Media screen appears.
If you decide to cancel, press the [Exit] button.
4. Use the [–] [+] buttons to select the media that you want to
format.
5. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
6. Use the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The memory is formatted.
NOTE
Do NOT turn o the power or disconnect the USB ash drive
while “Executing...” is displayed.
7. Press the [Exit] button several times to exit Function mode.
Restoring the Factory Settings (Factory Reset)
Here’s how to restore all registrations and internally saved settings to the
factory-set condition. This function is called “Factory Reset.”
NOTE
A factory reset returns all of your saved settings to their factory
values.
MEMO
Executing this function does not erase the data in internal
memory or on a USB ash drive (sold separately). If you want to
erase all songs from internal memory or from a USB ash drive,
refer to “Reformatting Memory (Format Media)” (p. 16).
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Factory Reset.”
2. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
3. Press the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
The memory is reset to its factory values.
NOTE
Do NOT turn o the power while “Executing...” is displayed.
4. Turn the power o, then on again (p. 4).
Retaining Settings After Power-O (Memory Backup)
Temperament settings, equalizer settings, and other settings are reset to
their default values when the FP-60 is turned on.
You can automatically restore the desired settings if you save them in
internal memory.
MEMO
For a list of settings saved by Memory Backup, see “Saved
Settings” (p. 27).
1. Press the [Function] button, and then use the [K] [J]
buttons to select “Memory Backup.”
2. Press the [Function] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [Exit] button.
3. Press the cursor [J] (right) button to select “Yes,” and then
press the [Function] (Enter) button.
Memory Backup will be carried out.
NOTE
Do NOT turn o the power while “Executing...” is displayed.
4. Press the [Exit] button several times to exit Function mode.

Roland FP-60 Specifications

General

Sound effects	Ambience, Equalization
Tones quantity	279
Pedals quantity	1
RMS rated power	26 W
Number of speakers	2
Maximum polyphony (notes)	288
Display resolution	132 x 132 pixels
Product color	Black
Keyboard name	PHA-4
Keys quantity	88 keys
Tuning frequency	415.3 - 466.2 Hz
Temperament types	Arabic, Equal, Just Major, Just Minor, Kirnberger I, Kirnberger II, Kirnberger III, Meantone, Pythagorean, Werckmeister
Sound pressure level	103 dB
Temperaments quantity	10
Mobile operating systems supported	Android, iOS
Bluetooth version	3.0+HS
USB connector type	USB Type-A, USB Type-B
Power consumption (max)	22 W
Power consumption (min)	4 W

Weight and Dimensions

Depth	344 mm
Width	1291 mm
Height	125 mm