Roland JUNO-Gi User Manual

114
PHASER
Parameter Value Explanation
Type
Selects the number of stages that the phaser eect uses.
4 STAGE
This is a four-phase eect. A light
phaser eect is obtained.
8 STAGE
This is an eight-phase eect. This is the
most common phaser eect.
12 STAGE
This is a twelve-phase eect. A deep
phase eect is obtained.
BI-PHASE
This is the phaser with two phase shift
circuits connected in series.
Rate 0–100, BPM This sets the speed of the eect.
Depth 0–100 This sets the richness of the eect.
Resonance 0–100 This sets the intensity of the eect.
FLANGER
Parameter Value Explanation
Rate 0–100, BPM This sets the speed of the eect.
Depth 0–100 This sets the richness of the eect.
Manual 0–100
Adjusts the modulation frequency of the
anger eect.
Resonance 0–100 This sets the intensity of the eect.
TREMOLO
Parameter Value Explanation
Rate 0–100, BPM This sets the speed of the eect.
Depth 0–100 This sets the richness of the eect.
Wave Shape 0–100
Adjusts changes in volume level. A higher value
will steepen wave’s shape.
ROTARY
Parameter Value Explanation
Rate Slow 0–100, BPM
This parameter adjusts the SPEED SELECT of
rotation when set to “SLOW.”
Rate Fast 0–100, BPM
This parameter adjusts the SPEED SELECT of
rotation when set to “FAST.”
Depth 0–100 This sets the richness of the eect.
Speed Select SLOW, FAST
This parameter changes the simulated speaker’s
rotating speed.
If you set “Control Pedal Assign” (p. 81) to “INSERT
FX CTRL,” you can use an expression pedal or
a foot switch to change SLOW/FAST of the
speaker’s rotating speed.
UNI-V
Parameter Value Explanation
Rate 0–100, BPM This sets the speed of the eect.
Depth 0–100 This sets the richness of the eect.
Level 0–100 This sets the volume level of the eect.
PAN
Parameter Value Explanation
Rate 0–100, BPM This sets the speed of the eect.
Depth 0–100 This sets the richness of the eect.
Wave Shape 0–100
Adjusts the sound character of the volume level
changes imparted with the pan eect.
When set to BPM
When set to BPM, the value of the RATE parameter is set according to the value
of the “Recorder Tempo” (p. 122). This makes it easier to achieve eect sound
settings that match the tempo of the song.

Roland JUNO-Gi Specifications

General

Polyphony	128 voices
Parts	16 parts
Keyboard	61 keys (with velocity)
Wave Memory	128 MB (16-bit linear equivalent)
D Beam Controller	Yes
Power Supply	AC Adaptor
Effects	Multi-effects, reverb, chorus
Display	240 x 64 dots graphic LCD
Sequencer	16-track sequencer
Outputs	2 x 1/4" (L/Mono, R), 1 x 1/4" (phones)
USB	USB (audio/MIDI/data transfer)
Preset Patches	Over 1, 300
External Storage	SD/SDHC memory card
Connectors	MIDI In/Out, USB
Weight	5.7 kg
Patches	Preset: 1, 000 + User: 256
Sampling	Not supported