Roland R-26 User Manual

Connecting to Your Computer via USB
85
Overview Getting Ready Recording Playback File Operation Computer Appendix
Mac OS
1. Drag “NO NAME” into the trash in the
dock.
When you drag to the location of the trash
at the right edge of the dock, the trash can
will change to
, allowing you to stop the
connection.
2. Stop the connection.
When the “NO NAME” or “Unnamed” icon
disappears from the desktop, you can
disconnect the USB cable that’s between
the R-26 and your computer. Alternatively,
you can switch o the R-26’s power.
* While under most conditions, a
computer similar to the above will
permit normal operation of the R-26,
Roland cannot guarantee compatibility
solely on these factors. This is due to
numerous variables that may inuence
the processing environment, such as
dierences in motherboard design and
the particular combination of other
devices involved.

Roland R-26 Specifications

General

Sample rate	96 kHz
Audio quality	24 bit
XLR in	-
Interface	USB
USB 2.0 ports quantity	1
Product color	Black, Grey
Microphone input impedance	3000 Ω

Weight and Dimensions

Weight	370 g
Dimensions (WxDxH)	82 x 180 x 41 mm