Roland RD-08 User Manual

2020
Making detailed settings for tones
The RD-08 has two types of sound-related editing.
Scene edit
Here you can edit parameters for a Scene. These parameters include the
on/o setting and level adjustment of each zone, eect settings for each
Scene.
System eect edit
Here you can edit settings for the eects that apply to the overall output
sound (system eects).
The system eects provide chorus/delay, reverb, EQ, and compressor.
NOTE
¹ The edited settings will disappear unless you save (write) them. If
you want to keep the settings, save them as follows.
¹ A Scene that you’re editing is indicated by an edit symbol (*)
beside the Scene number.
Editing a scene
1. Press the [MENU] button.
2. Use the cursor [ä] [å] buttons to select “SCENE
EDIT”, and then press the [ENTER] button.
3. Use the cursor [ä] [å] buttons to select the item
that you want to edit, and press the [ENTER] button.
4. Use the cursor [ä] [å] buttons to select a parameter,
and use the [DEC] [INC] buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
MEMO
If there are multiple pages within an item, “ã” “ â” symbols are shown
at the upper right of the screen. Use the cursor [ç] [æ] buttons to move
between pages.
Saving a scene (write)
5. To save the changes, hold down the [SHIFT] button
and press the [MENU] button.
MEMO
If you edit the Scene, an “*” symbol appears beside “SCENE”.
6. Use the cursor [ä] [å] buttons to select “SCENE”,
and then press the [ENTER] button.
A screen appears where you can select the save-destination
Scene.
7. Use the cursor [ä] [å] buttons to select the save-
destination Scene, and then press the [ENTER]
button.
The Scene name entry screen appears.
8. Use the cursor [ç] [æ] buttons to move the cursor,
and use the [DEC] [INC] buttons to change the
character.
9. When you’ve nished editing the name, press the
[ENTER] button.
The SCENE WRITE conrmation screen appears.
NOTE
When you save, the Scene of the selected save-destination is overwritten,
and the previous data is lost.
10. To execute, use the cursor [æ] button to select
“WRITE”, and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
NOTE
The changes in the Scene you’re editing are lost if you turn the power o
or select another Scene. If you want to keep the settings, save the Scene.
Editing the system eects
1. Press the [MENU] button.
2. Use the cursor [ä] [å] buttons to select “SYSTEM
EFFECTS”, and then press the [ENTER] button.
3. Use the cursor [ç] [æ] buttons to select the eect
that you want to edit, use the cursor [
] [ ] buttons
to select a parameter, and use the [DEC] [INC]
buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
Saving the system eects (write)
4. To save the changes, hold down the [SHIFT] button
and press the [MENU] button.
MEMO
If you edit the system settings, an “*” symbol appears beside “SYSTEM”.
5. Use the cursor [ä] [å] buttons to select “SYSTEM”,
and then press the [ENTER] button.
The SYSTEM WRITE conrmation screen appears.
6. To execute, use the cursor [æ] button to select
“WRITE”, and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.

Roland RD-08 Specifications

General

Brand	Roland
Model	RD-08
Category	Musical Instrument
Language	English