Roland RD-08 User Manual

2424
Other functions
7. When the screen indicates “Completed.” turn the
RD-08’s power o and on again.
If no sound packs are imported or installed
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. To execute, use the cursor [æ] button to select “OK”,
and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
5. When the screen indicates “Completed.” turn the
RD-08’s power o and on again.
Formatting a USB ash drive
(FORMAT USB MEMORY)
NOTE
¹ If the USB ash drive contains important data, be aware that this
operation erases all data from the drive.
¹ Never turn o the power or remove the USB ash drives while the
screen indicates “Executing...”.
1. Press the [MENU] button.
2. Use the cursor [ä] [å] buttons to select “UTILITY”,
and then press the [ENTER] button.
3. Use the cursor [ä] [å] buttons to select “FORMAT
USB MEMORY”, and then press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
4. To execute, use the cursor [<] [>] buttons to select
“OK”, and then press the [ENTER] button.
When formatting is complete, the screen indicates “Completed!”
The folder structure of a USB ash drive
ROLAND
RD-08
BACKUP
SONG LIST
To play songs from a USB ash drive,
place them in the SONG LIST folder.
The backed-up data is saved in the
BACKUP folder.
SOUND
To import tones, place them in the
SOUND folder.
Editing the system settings (SYSTEM)
Here’s how to edit system parameters.
1. Press the [MENU] button.
2. Use the cursor [ä] [å] buttons to select “SYSTEM”,
and then press the [ENTER] button.
3. Use the cursor [ä] [å] buttons to select the item
that you want to edit, and press the [ENTER] button.
4. Use the cursor [ä] [å] buttons to select the
parameter that you want to edit, and use the [DEC]
[INC] buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
Saving the system settings (system write)
5. To save the changes, hold down the [SHIFT] button
and press the [MENU] button.
MEMO
If you edit the system settings, an “*” symbol appears beside “SYSTEM”.
6. Use the cursor [ä] [å] buttons to select “SYSTEM”,
and then press the [ENTER] button.
The SYSTEM WRITE conrmation screen appears.
7. To execute, use the cursor [æ] button to select
“WRITE”, and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
Viewing the program version
(INFORMATION)
Here’s how to view the version of the RD-08’s system program.
1. Press the [MENU] button.
2. Use the cursor [ä] [å] buttons to select
“INFORMATION”, and then press the [ENTER]
button.

Roland RD-08 Specifications

General

Brand	Roland
Model	RD-08
Category	Musical Instrument
Language	English